Reverse osmosis membrane 50 GPD IVAR.M GPD for the IVAR.MO550 unit
Code: ESCSV181250ECOProduct detailed description
The fourth stage of the MO550
The IVAR.MO550 unit purifies water in five stages – 5 µm polypropylene filter, pressed activated carbon block, 1 µm polypropylene filter, reverse osmosis membrane and remineralising cartridge. The 50 GPD membrane produces about 190 litres of treated water per day (7.9 l/h). As this is a slower process, the MO550 stores the water in a tank (12 l, of which 5 l is available immediately) and delivers it as needed.
When to replace the membrane
- at least once a year, at the latest after 1.5 years
- sooner if filtration slows down significantly or the TDS of the treated water exceeds the permitted limit
- replace the pre-filters at least every 6 months – neglecting this can damage the membrane
Technical data
| Code | ESCSV181250ECO |
| Brand | IVAR |
| Type | IVAR.M GPD |
| Kind | reverse osmosis membrane (4th stage) |
| Capacity | 50 GPD (approx. 190 l/day, 7.9 l/h) |
| Intended for | IVAR.MO550 (ESMO550MPECO) |
| Replacement interval | at least once a year, at the latest after 1.5 years |
| Pack size | 1 piece |
Frequently asked questions
How often is the IVAR.MO550 membrane replaced?
At least once a year is recommended, and at the latest after 1.5 years. Significantly slower filtration or treated water exceeding the TDS limit calls for an earlier replacement.
Why does the MO550 unit have a storage tank?
The 50 GPD membrane produces about 7.9 l of water per hour, which is not enough for immediate drawing. The unit therefore stores the water in a tank and delivers it from there as needed.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Type: | filter cartridge |
| Code: | ESCSV181250ECO |
| Brand: | IVAR |
| Type: | IVAR.M GPD |
| Kind: | reverse osmosis membrane (4th stage) |
| Capacity: | 50 GPD (approx. 190 l/day, 7.9 l/h) |
| Intended for: | IVAR.MO550 (ESMO550MPECO) |
| Replacement interval: | at least once a year, at the latest after 1.5 years |
| Pack size: | 1 piece |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.