Remineralising post-filter IVAR.MCB for the IVAR.CROSS 90 unit – SALE
Code: ESPDCBDFROProduct detailed description
Taste and minerals to finish
The MCB cartridge contains the fourth and fifth stages of the IVAR.CROSS 90 BALANCE unit. The activated carbon polishes the water that has passed through the reverse osmosis membrane, and the remineralising filling enriches it with essential minerals. According to the manufacturer, the treated water has a total mineral content of 40–70 mg/l and better taste and smell.
Replacement
- every 12 months or after 4000 l of treated water
- the unit signals the replacement with the CB/MCB indicator
- a change in taste right after replacement is normal – new material has its highest capacity at the start
Technical data
| Code | ESPDCBDFRO |
| Brand | IVAR |
| Type | IVAR.MCB |
| Kind | remineralising post-filter (stages 4 and 5) |
| Material | activated carbon + remineralising filling |
| Intended for | IVAR.CROSS 90 BALANCE (ESMO3600MPECO) |
| Mineral content of treated water | 40–70 mg/l |
| Replacement interval | 12 months / 4000 l |
Frequently asked questions
How often should the MCB post-filter be replaced?
Every 12 months or after 4000 l of treated water. The unit signals the replacement with the CB/MCB indicator.
Why does the water taste slightly different after changing the MCB?
New remineralising and carbon material has its maximum capacity at the start of its life, so taste and smell may change briefly. These properties settle gradually during operation.
Additional parameters
| Category: | UV lamps and reverse osmosis systems |
|---|---|
| Warranty: | 2 years |
| Type: | filter media / refill |
| Code: | ESPDCBDFRO |
| Brand: | IVAR |
| Type: | IVAR.MCB |
| Kind: | remineralising post-filter (stages 4 and 5) |
| Material: | activated carbon + remineralising filling |
| Intended for: | IVAR.CROSS 90 BALANCE (ESMO3600MPECO) |
| Mineral content of treated water: | 40–70 mg/l |
| Replacement interval: | 12 months / 4000 l |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.