WITA Trap MS sludge separator with magnet, brass version
Code: A60160Product detailed description
The WITA Trap MS is a brass dirt separator with a magnet that removes impurities from heating water and thus protects circulation and high-efficiency pumps and valves. It is used in heating, cooling and solar systems. It captures iron particles (magnetite) as well as non-magnetic impurities and sludge that occur in both older and newer systems. The pumped medium is heating water according to VDI 2035.
Why to include it in the system
- effective removal of impurities larger than 5 μm
- protection of the pump and other sensitive components
- simple, quick and safe emptying of the separator during operation
- protection of the system against sedimentation, wear and subsequent faults or shutdowns
- suitable for heating, cooling and solar systems
Cleaning the separator
Accumulated impurities can be flushed out quickly and with strong flow. It is sufficient to remove the magnetic plug and open the drain valve, even during system operation.
Technical data
| Brand | WITA |
| Product code | A60160 |
| Material | brass |
| Nominal diameter | DN 25 |
| Connection thread | 1" |
| Maximum operating pressure | 1 MPa / 10 bar |
| Kvs value | 4.1 m³/h |
| Operating temperature range | 0 – 90 °C |
| Captured impurities | from 5 μm |
| Magnet strength | 250 mT (2 500 G) |
| Medium | heating water according to VDI 2035 |
Frequently asked questions
Can the separator be emptied during system operation?
Yes. After removing the magnetic plug and opening the drain valve, impurities are flushed out even during operation.
What impurities does the separator capture?
Iron particles (magnetite) as well as non-magnetic impurities and sludge, from the size of 5 μm.
For which systems is the separator suitable?
For heating, cooling and solar systems.
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!