Related products for boilers

Hello, the BOSCH Condens GC 2300i W 22/25 C is listed with a turbo flue design. Can I connect it to a conventional 100 mm chimney?

Hello, a plastic flue is required. Have a nice day.

I have an aluminium one, is that a problem?

No, that is not a problem, but it must be designed for condensing boilers. Have a nice day.

Hello, I would like to ask about my options. We currently have a Junkers boiler with a Junkers CW 400 thermostat (I believe it is just a rebranded Bosch). The outdoor temperature sensor was fitted in a spot that we have now decided to roof over, so I am wondering whether this sensor can be replaced with a different one; I am thinking of a wireless one. Do you offer anything like that? My second question is partly related. In time we would probably like to move the CW400 controller itself as well. So again, what are the options for replacing it? I imagine a thermostat connected to the boiler wirelessly; remote setting would in theory be interesting, but it is not essential. Thank you for the information, kind regards

Hello, as far as I know neither the outdoor temperature sensor nor the thermostat is available as a wireless version. As for controlling the boiler remotely, we can recommend this controller or set: https://www.atria.sk/bosch-cr-100-rf/ https://www.atria.sk/bosch-cr-100-rf-set/ Have a nice day.

Could you tell me, please, whether the Q-TERMO Trend 80 HK water heater can be connected to a gravity-fed system? Kind regards

Hello, this water heater is only intended for forced circulation with a pump. Have a nice day.

Hello, I would like to ask whether you offer a plasterboard pass-through to the chimney for a condensing boiler. The pipe diameter is 100 mm. Thanks.

Hello, unfortunately we do not offer such a pass-through. Have a nice day.

Hello, do you also sell a replacement rubber seal for the Fernox TF1 filter?

Hello, no, I am sorry, but we do not have the seal available. Have a nice day.

Miriam Matulova we would need a flexible hose for a kitchen tap with a pull-out spray

Hello, the flexible hoses we have available can be found here: https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/gulove-ventily-filtre-klapky/flexi-hadice-nerez/ Have a nice day.

Good day, I would like to ask whether it would be possible to order a seal for the sink shown? What would the price plus delivery be? Thank you

Hello, we have sent the answer to your e-mail address. Have a nice day.

Hello, do you also sell spare parts for the Pyramis Amaltia sink?

Hello, no, we do not have spare parts available. Have a nice day.

Hello, I need to push water through a 3/4", 100-metre HDPE hose and for this purpose I am considering the IBO OHI 25/60-180 circulation pump that you offer. I would like to ask whether this type is suitable and powerful enough (I need to pump approx. 1.5 m3 per hour). Thank you for the information

Hello, yes, you can use this pump. Have a nice day.

Hello. I have this type of water heater and after about 2 years our hot water pressure started to drop. What are the options for cleaning this type? Thank you for your answer. Peter.

Hello, which water heater exactly is it? Thank you.

QUADRIGA 120P CA

Hello, I am sorry, but we cannot advise you on this; we no longer have these water heaters available, as they are no longer manufactured. Have a nice day.

I would like to ask whether you could advise me or send me a link. I need to buy a magnetic filter for the boiler I ordered from you, thank you

Hello, you can find the magnetic filter right here: https://www.atria.sk/total-filter-tf1-1-komplet/ https://www.atria.sk/total-filter-tf1-3-4-komplet/ Wishing you a nice day

A straight adaptor 10x3/4 with female thread, and I cannot find it anywhere on your site. Thank you for the information. Kind regards

Hello, only this: https://www.atria.sk/vykurovacia-technika/kurenie-hepworth-profesionalne-a-jednoducho-hep2o/stenove-kurenie-vykurovanie/ Have a nice day.

Multilayer pipe ALPEX-GAS, 20 x 2 - can you also send me 15 m in one piece as a coil, or only as 5 m lengths?

Hello, this pipe is still available: https://www.atria.sk/viacvrstvove-potrubie-alpex-gas-20-x-2/ Have a nice day.

Hello, I would like some information. I have a newly built family house and I want water-based underfloor heating, but I am wondering whether to go for gas or electricity. Could you advise me? About 200 m2, ground floor only, no upper floor. And what would the costs of heating and hot water be with electricity and with gas? Thank you

Hello, we cannot tell you the costs, as they depend on several factors: the temperature you heat to, how often, heat losses, the price... Would you like a boiler with a hot water cylinder? Thank you.

Yes

You can find a suitable condensing boiler here: https://www.atria.sk/bosch-condens-gc-2300i-w-24-wst-120-5-o-cw-100/ Have a nice day.

Hello, I am looking for a battery for a Mitsubishi Lancer 2.0 DID 103 kW. The battery code comes up as 95 Ah. But at the moment I have a 70 Ah one in there and it seems weak to me, so I am not sure.

Hello, the supplier gave us this information: the fitment tables list 80 Ah / 730 Ah (278x175x190). Have a nice day.

Hello! We have our own heat exchanger station for a smaller multi-purpose building (approx. 20 radiators), where we plan to end the heat supply from the central source, and we are considering an electric heat source feeding the existing radiator pipework. Is it economically viable, and is it possible for an electric boiler to supply heat to our "exchanger", possibly also separately for hot water as we have it now, or together? The point is that we would not have to change the whole system... Thank you.?

Hello, yes, it is possible, but you need to call in a heating engineer for this. Have a nice day.

I need batteries for a BS12 cordless screwdriver, because the old ones no longer hold their capacity. Although the tool is still sold, I cannot get hold of the batteries. Do you know where they could still be bought?

Hello, I am sorry, but we no longer have this range available. Have a nice day.

I need a rotating grate for an Atmos C18S boiler

Hello, the grates we have available can be found here: https://www.atria.sk/vykurovacia-technika/stacionarne-kotly-a-zasobniky/atmos/nahradne-diely-atmos/splynovacie-rosty/ Have a nice day.

Hello, I would like to order the cleaning powder for a Blanco sink

Hello, at the moment the supplier only has this available: https://www.atria.sk/cistiaci-prostriedok-blanco-cera-care/ Have a nice day.

Good evening, is it possible to order from you as a private individual, or do you have a retail outlet? Thank you, kind regards, Marek

Hello, yes, of course, you can also shop on our website https://www.atria.sk/ as a private individual; no registration is needed. Have a nice day.

Hello, I would be interested in buying the Karma Beta 3 MC gas heater. I would like to ask whether the 60 cm flue pipe is included in the package, or whether it has to be ordered separately together with the terminal guard. Thank you for your answer

Hello, it has to be ordered separately. Have a nice day.

Hello, I am interested in ordering the Telma CUBE 760.500 sink from you. What is the delivery time?

Hello, I am sorry, but we do not have this product available. Have a nice day.

Hello, I am looking for a Viadrus 25 boiler for hardwood. Do you have anything available?

Hello, I am sorry, but we no longer have Viadrus boilers available. We only have Atmos boilers available: https://www.atria.sk/vykurovacia-technika/stacionarne-kotly-a-zasobniky/atmos/ Have a nice day.

Hello, I would like to ask for advice on underfloor heating for a 70 m2 garage where the walls are concrete and there will be a green roof on top. The customer requires a temperature of approx. 18°C and there will be an electric boiler. I am interested in the quantity of material and a rough estimate of the electric boiler output. A tacker system for the underfloor heating + pipe (Pe-xA), the edge strip comes in 50 m, a wall cabinet plus valves for connecting the manifold

Hello, I am sending you the requested quotation for approx. 70 m2 of underfloor heating. You can find the tacker here: https://www.atria.sk/naradie-pre-strojne-uchytavanie-potrubia-s-pouzitim-spon-typu-hs/ A suitable electric boiler: https://www.atria.sk/protherm-ray-9ke/ Have a nice day.

Hello, is it possible to buy an electric heating element for a 300 L hot water cylinder from you? I am using an element with a thermostat, but once a year it always fails from overheating. I would need an element with some kind of control over the switch-on and switch-off temperature, e.g. heating set to 60 degrees and switching on again only when it drops to 45 degrees. These standard elements with a thermostat keep switching on, because as soon as the water runs for a moment they start reheating straight away, and they simply do not last. I use a 3 kW element and the cylinder also allows a temperature sensor to be retrofitted. Thank you very much for your answer.

Hello, the only element we have available for hot water cylinders is this one: https://www.atria.sk/el-spirala-ku-zasobnikom-kompakt-a-vf-2kw/ Have a nice day.

Hello, I would like some information about the 6-section Viadrus U26

Hello, we no longer have this boiler available. Have a nice day.

Can you recommend something similar?

We only have Atmos gasification boilers available: https://www.atria.sk/vykurovacia-technika/stacionarne-kotly-a-zasobniky/atmos/

Hello, I would be interested in the Metabo DH330; could you tell me more about its availability? Thank you

Hello, I am sorry, but we will no longer have this product available. Have a nice day.

Hello, I have a Junkers CERASMART ZB 7-22 A21/23 condensing boiler and an FR100 room controller. Can I connect an outdoor temperature sensor to them for weather-compensated control?

Hello, yes, you can. Have a nice day.

Hello, I would like some information. During the year I would like to open a plumbing, heating and gas shop. Could you tell me roughly what it would cost me and whether you have all the material for such a shop? Have you by any chance prepared an offer like this before?

Hello, we cannot tell you what it will cost you... Yes, the material we have available can be found directly on our website: https://www.atria.sk/ Have a nice day.

Hello. May I ask for your contact details?

Hello, you can find our contact details directly on our website: https://www.atria.sk/clanky/kontakt/ Have a nice day.

Hello, I would like to ask: I have a 150 l Tatramat combined water heater and it is connected to a gravity-fed heating system. Quite often, when the heating cools down, the water heater cools down with it. Is there some kind of control for this, or what would you recommend?

Hello, I am sorry, but we do not quite understand the problem. Could you describe in more detail what exactly you need? Thank you.

Once the boiler is no longer being fired, the hot water from the combined water heater heats the radiators on the same riser, so the radiators cool down and so does the water in the cylinder

Yes, in that case: https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/gulove-ventile-filtre-klapky/vodorovna-spatna-klapka/ https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/gulove-ventile-filtre-klapky/spatna-klapka-s-pruzinou/ Have a nice day

Hello, which gas water heater would you recommend for a small hostel with about 6 bathrooms and approx. 15 people? Thank you

Hello, the only gas water heater of this kind we have available is: https://www.atria.sk/protherm-panda-iog-24-1/ Have a nice day.

Hello. Just one question. If I have 7 gas convector heaters in the rooms and 2 small ones (toilet and bathroom), the gas consumption will probably be high. Are there any gas convector heaters with low gas consumption? For example a turbo version or one with double combustion.

Hello, yes, the gas consumption will certainly be high. I cannot tell you whether such models exist... Have a nice day.

Hello, I would like to ask about the availability of spare parts for the Vaillant ecoTEC plus VUW INT 236/3 5 boiler... the fan... thank you

Hello, for spare parts I would recommend contacting your service technician. Have a nice day.

Hello. This concerns a studio flat in the historic centre of TN, 20 m2, 1 room, 1 bathroom, 1 kitchenette. I will run the radiator pipework myself. I have a 20 cm masonry chimney. I am on the upper floor, with the loft above. I am looking for a boiler (approx. 11 kW); it will be in the bathroom, where there is a vent to the loft (plenty of oxygen). A boiler for heating (3 radiators - 2 towel radiators, 1 panel radiator) and hot water for the bathroom (the kitchen has electric water heating). The chimney would need to be adapted. Please send me a quotation with an itemised breakdown. Thank you.

Hello, you can find radiators here: https://www.atria.sk/vykurovacia-technika/radiatory/ a towel radiator: https://www.atria.sk/vykurovacia-technika/radiatory-rebrikove/vykurovacie-rebriky-rovne/ a suitable combi boiler: https://www.atria.sk/bosch-condens-gc-2300i-w-22-25-c-cw-100/ and you can put the flue together exactly to your requirements right here: https://dymovod.sk/ Have a nice day.

Hello, which outdoor temperature sensor is suitable for the Vaillant eloBLOCK VE 18/14 EU III electric boiler, please?

Hello, I am sorry, but we do not have this item available; it always comes packed with the controller. Have a nice day.

Hello, I have already written to you directly on the website, but to be on the safe side I am asking here as well. I plan to use multilayer (PEX-AL-PEX) pipe for radiator heating and hot water, and I need to know whether screw-type joints, tees and the like are also suitable for embedding in concrete for the radiators and in walls for the hot water and drinking water pipework?

Hello, yes, they are suitable. Have a nice day.

Hello, the rotary knob on my calorMATIC 470 is starting to fail. I plan to buy a new controller, but this time one that connects to a mobile phone or tablet. Which model could I replace it with? My boiler is an ecoTEC plus 186/3-5. Thank you

Hello, you can replace it with this one: https://www.atria.sk/vaillant-multimatic-700/ Have a nice day.

I am interested in coal; what is the price for 25 kg?

Hello, the coal we have available can be found here: https://www.atria.sk/hnede-uhlie-25-kg-balene/ Have a nice day.

Hello, I would like to ask: we started burning briquettes in our fireplace, but after a few days of heating the grate in the fireplace cracked. What could have caused it? Thank you.

Hello, I am sorry, but we cannot tell you that. The grate itself may have been faulty... Try asking the seller or a technician. Have a nice day.

Good evening, I would like to ask whether you have one measuring 180x60 cm with an output of 3000 W

Hello, you can find a suitable radiator here: https://www.atria.sk/radiator-22vk-600-x-1800-vykon-3118w/ Have a nice day.

Hello, I would like to ask whether compression fittings for multilayer pipe can also be used under plaster, or whether press fittings have to be used. Thank you

Hello, yes, of course. Have a nice day. Compression fittings can be used as well

I do not need to choose a discussion; I wanted to read the opinions and experience of those who already have some idea of what it is about

Hello, I do not understand; you can read the discussions without writing in the discussion... Have a nice day.

But I wanted to write a post

then you can write it directly under the product

Hello, is it possible to buy replacement seals (O-rings) from you for compression or press fittings for multilayer pipe?

Hello, unfortunately not, we do not have such seals. Have a pleasant day.

Hello. I would like to ask about the option of paying for a gas boiler in instalments. Do you offer that?

Hello, unfortunately payment in instalments is not possible with us. Have a nice day

Hello, we are renovating an older house and want to use underfloor heating. We have 140 m2 of floor area that would be heated. Could you tell me what the budget would be, or what I should reckon with? Thank you

Hello, would you like a quotation for screeded (wet) underfloor heating or a dry system? Thank you.

I would like to ask how much a metre of multilayer pipe costs

Hello, the minimum order is 10 m and you can find the 16 mm pipe here: https://www.atria.sk/potrubie-pex-al-pex-16-x-2/ Have a nice day.

I would like a quotation for 3 metres of corrugated pipe with a 1/2 thread at both ends

Hello, you can find the corrugated pipe here: https://www.vykurujem.sk/nerezovy-vlnovec-bez-izolacie-dn12/ I am sending you the requested quotation.

Hello. I need a quotation for replacing the shut-off valve upstream of the gas meter, fitted in a DN 53 mm riser. The old valve can no longer be operated. Thank you for the offer.

Hello, your only option is to try one of our installation partners: https://www.atria.sk/vykurovacia-technika/montazni-partneri/ Have a nice day.

Hello, is the Metabo Power Maxx ULA LED in stock? It cannot be added to the basket. Thank you

Hello, no, I am sorry, but we no longer have this range available. Have a nice day.

Hello. Our Eberle Instat 2 thermostat has stopped working. Do you still offer it, or what can we replace it with?

Hello, we do not have this one available, but have a look at this one, for example: https://www.atria.sk/avansa-2007/ Have a nice day.

Hello, the controller of my solar system, a Regulus STDCE, has broken down. Can you recommend a replacement? One with WiFi or an Ethernet connection would be great, thank you

Hello, you can find a suitable WiFi thermostat here: https://www.atria.sk/saswell-t19-7-rf-app/ Have a nice day.

Hello. I am interested in the Protherm solar set. I have a Vaillant boiler. Will they work together? Is this Protherm set sufficient for 5 people?

Hello, yes, they will work together. Have a nice day.

Hello... I would need some advice and would like to buy 2 thermostats and a circulation pump (I hope I have written that correctly)... so that I do not have to run the water off and wait for hot water. I have a 9 kW Panasonic heat pump... water-based underfloor heating... the house is divided into a day zone and a night zone... so two separate manifolds... one thermostat will be in the living room for the day zone... the other in the bedroom for the night zone... there are back boxes with cabling in the rooms. I would like digital ones... ideally with a colour display... showing the date... time... current temperature... set temperature... and ideally humidity too. As for the pump... something of good quality

Hello, you will probably have to use two, though: https://www.atria.sk/euroster-11-e/ Have a nice day.

Hello, will you still be offering the Blanco TOLON XL 6 S ceramic sink - with pop-up waste, complete trap? Thank you

Hello, I am sorry, but this sink is no longer available, not even from the supplier. Have a nice day.

Hello, the Metabo DH 330 thicknesser. Is it possible to buy it from you in instalments as well? Thank you

Hello, I am sorry, but we do not have this product available and we do not sell in instalments. Have a nice day.

Good evening, I am considering a 1500-litre buffer tank with an integrated 500 l water heater, connected to a solid fuel boiler. I would also like to have an electric heating element connected to photovoltaics and to the mains. Could you advise me on this, or carry out the installation? Thank you

Hello, I am sorry, but we do not carry out installations. Have a nice day.

And without installation, could you suggest a suitable option for me?

I am sorry, but we do not have this available at all.

Hello, I would like to ask whether you could send me a quotation (with delivery to Trnava) and the availability of a 5/4", DN32, PN 16 check valve with a length of 80 mm (photographs attached)? Thank you in advance for the information. Kind regards

Hello, you can find the product you asked about here: https://www.atria.sk/spatna-klapka-tazka-5-4/ Have a nice day.

Dear Sir or Madam, we would like a quotation + delivery date for the following item: Smart MiGo controller, PROTHERM, with WiFi connection ................................................. 1 pc

Hello, you can find the thermostat you asked about here: https://www.atria.sk/protherm-migo/ Have a nice day.

Hello, I am planning to replace the gas boiler in an old family house. The house is built of 50 cm solid fired brick, uninsulated except for the ceilings, which are insulated with 5 cm of polystyrene, and it has uPVC windows. At the moment I am running an old 24 kW Protherm combi boiler made in 1996. The total floor area of the house is 116 m2 and the volume is 290 m3. According to my calculations, taking the condition and age of the building into account, an 18 kW boiler should be enough for me. Will the Protherm Gepard Condens 18/25 MKV gas boiler be sufficient????? Please let me know what else I will need to buy: a flue through the wall, a room thermostat, an outdoor temperature sensor...........? Is some kind of connection rail also needed, or is the existing pipework simply connected up? THANK YOU for a prompt reply

Hello, yes, the boiler will be sufficient. A connection rail is not needed; you can find a suitable thermostat here, for example: https://www.atria.sk/avansa-2007-tx/ and the sensor: https://www.atria.sk/protherm-0020040797/ and you can put the flue together to suit your needs directly on our website: https://dymovod.sk/ Have a nice day.

One more question: a thermostat controllable via WiFi and an app - which one is compatible with this boiler, or are all the ones in your range?

Yes, you can choose between https://www.atria.sk/salus-it500/ and https://www.atria.sk/saswell-t19-7-rf-app/ Have a nice day.

Flink FTWiFi? I am looking at those flues; a complete one would be best, the wall is 50 cm thick, what do you advise? I would like to order everything today, the whole lot. Boiler, flue through the wall, thermostat, Total Filter, outdoor temperature sensor - is that everything? + an additional expansion vessel

You can find the flue here: https://www.atria.sk/protherm-zostava-vodorovna--60-100-mm-0-8m-s1k/ The sensor, as I sent you above: https://www.atria.sk/protherm-0020040797/ An expansion vessel is already built into the boiler. You can find the Total Filter here: https://www.atria.sk/total-filter-tf1-1-komplet/

Hello, regarding my order, can you tell me roughly when it will be dispatched?

Hello, we have ordered the boiler and the Protherm components for you from the supplier, and we expect the Total Filter during next week. As soon as your order is complete, we will dispatch it to you straight away. Have a nice day.

Hello, I cannot get the Saswell to connect to WiFi

Hello, and what exactly is not working for you? Thank you.

Well, I cannot get it started; where do I enter the SSID code from the product? I would also like advice on the receiver: do the COM contacts connect to the boiler on eBUS? If so, they say to use an eBUS cable; in the electrical shop they just stared at me, not knowing what I wanted

Try following this: http://prntscr.com/va1k44

Hello, could I still change my order?

Hello, your order has already been passed to the warehouse; can you tell me what exactly you need to change? Thank you.

I forgot to add 4 x 22 mm pipe support sleeve

Thank you, we have added these items to your consignment. Have a nice day.

Hello! Will it be possible to order from you as normal during the curfew?

Hello, we do not know what will happen, but at the moment the boiler can be ordered and we are able to send it to you. Have a nice day.

All right. In that case I would place my order with you by tomorrow afternoon at the latest. What are the payment options?

The payment options are a pro forma invoice or cash on delivery, or payment via the payment gateway directly on the website when placing the order. The delivery time depends on the boiler model. Have a nice day.

Thank you for the info. I have already ordered with cash on delivery.

Thank you for letting us know, and enjoy the rest of your day

Hello, I would need the rear SECTION for a Viadrus Hercules U26 7 ND, made in 2004

Hello, I am sorry, but we do not have this product available. Have a nice day.

Hello, I am looking for a pellet plus wood boiler that you would recommend. I need 45 to 50 kW. I have around 520 m2 to heat. 180 m2 is underfloor heating, the rest is radiators. Thank you for your offer

Hello, at such a high output the only option, as far as Atmos is concerned, is the DC50S boiler adapted for pellets... but every time you want to change the fuel from wood to pellets or vice versa, you have to physically fit or remove the pellet burner from the upper door... automatic switching between fuels without physically fitting the burner is only available at lower outputs with Atmos, or else two boilers - one for wood and one for pellets... and two chimneys. I do not know how often you want to change the fuel... or what you have in mind... Have a nice day.

Do you recommend combined wood and pellets? Or rather just one? The Attack DPXP 45 Kombi Pellet boiler? Or the Maga 49 Premium? Or possibly the Defro Ekopell? Which would you recommend?

Hello, we would recommend Atmos, as we have experience with it. Have a nice day.

Good day, I bought a DAB Piccola pump, switched it on and it does not run. I would like to know why

Hello, in your place I would return it under warranty. Have a nice day.

Hello, I would like to ask whether I can order natural gas jets for a Beko gas cooker from you

Hello, I am sorry, but we no longer have this range available. Have a nice day.

Hello, I saw those electronic face masks, or rather personal air purifiers. Do you have a certificate confirming that they qualify as a replacement for a conventional face mask?

Hello, we have sent the requested certificate to your e-mail address. Have a nice day.

where could I buy bagged brown coal near Svidník

Hello, I am sorry, I cannot tell you. We have this coal available in our e-shop: https://www.atria.sk/hnede-uhlie-25-kg-balene/ Have a nice day.

Hello, I would like to replace my boiler; I have a Protherm 30 PLO boiler dating from 2000. Unfortunately I have a limited budget for the boiler itself, up to about 900-950 EUR. We have a two-storey family house. I am considering the https://www.atria.sk/protherm-gepard-condens-25-mko/ or the https://www.atria.sk/protherm-gepard-condens-18-25-mkv/ boiler. I would be glad if you could recommend the best replacement for my old boiler. Thank you in advance

Hello, you can find a suitable boiler here: https://www.atria.sk/bosch-condens-gc-2300i-w-24-p/ or a Protherm one: https://www.atria.sk/protherm-panther-condens-30-kko/ Have a nice day.

PLEASE, DOES THE PROTHERM GEPARD CONDENS 18-25 MKV HAVE A CIRCULATION PUMP

Hello, yes, this boiler has a pump. Have a nice day.

Hello, is it possible to order both a standard blade and a mulching blade for the ABG 595 Premium Line lawnmower? Thank you

Hello, I am sorry, but we no longer have this range available. Have a nice day.

I need a display for an older Junkers 26 kW condensing boiler, made in 2006

Hello, I am sorry, but we do not have this range available. Have a nice day.

can private individuals shop with you?

Hello, yes, of course, you can also shop on the website as a private individual. Have a nice day.

Hello, in our plant room we have a chimney system (single flue) for solid fuel (fireclay liner) with an opening for an access door at the bottom; the diameter is 160 mm. Is it possible to fit a plastic liner for a condensing boiler into such a chimney, one that removes the flue gases and also draws in the combustion air, so that the chimney could be used for heating with a condensing boiler?

Hello, I do not think so; if a wood boiler is already connected to it, there should not be a plastic pipe in the chimney, as it would melt. Have a nice day.

the chimney is unused and there is no boiler connected at the moment; it would be used purely for the condensing boiler

Yes, of course, if it is empty then you can; you just have to insert a plastic pipe, and it must run right up above the roof. Have a nice day

Hello. Could you recommend a circulation pump for an OPOP Biopel 20 kW boiler? And I would like to ask which three-way valve to use. I will be heating a combined water heater and 7 radiators.

Hello, you can find a suitable pump here: https://www.atria.sk/avansa-25-6-180/ and a three-way valve: https://www.atria.sk/euromix-f4-3-4-kvs-6/ Have a nice day.

Hello, I would like some information about the mixing sets for boilers H21253 and H21261: can I use them for underfloor heating, with a EUROSTER 11M added for control? Thank you

Hello, yes, of course: https://www.atria.sk/vykurovacia-technika/nerezove-kotlove-zostavy/ Have a nice day.

Hello. I would like to order a 20 m solar twin pipe from your website, but I do not know which pipe diameter to use - DN16 or DN20. The manufacturer of the solar kit I bought did not state this anywhere. I have 3 vacuum solar panels with 18 tubes each, i.e. 54 tubes, and a 500 l bivalent cylinder. The cylinder has only 1/2 inch connections, and the only connecting piece I have is a 0.5 m DN16 corrugated pipe with a 3/4 connection reduced to 1/2, which the manufacturer supplied with the expansion vessel. The pump supplied in the solar kit has a flow rate of 13 l/min. I hope you can advise me. Thank you very much for your help.

Hello, if you have a 500 l cylinder, we would definitely recommend DN20. Have a nice day.

Hello, do you have a gas hose with a 3/4 nut to a 1/2 thread?

Hello, the gas hoses we have available can be found here: https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/plynove-pripojovacie-hadice/ Have a nice day.

Hello, could you please tell me what the choice of pipe diameter should be based on? We are renovating our bathroom, the new pipes are already in the wall (the tiler is due to start on the tiles today) and we have found that the water pressure is low. We are worried that it will not be enough for showering; also, when I fill a bucket to wash the floor, for example, it takes far too long. We are so concerned that we are thinking of chasing the pipes out and changing the diameter. The bathroom is upstairs and we plan to connect a washing machine and other appliances in future. So far we have had only good experience with the plumber who did the work, so we do not understand why this problem has arisen... Thank you very much for your advice; we are planning further renovations next year, so this is quite important to us.

Hello, if your pressure is low I would choose https://www.navio.cz/potrubi-pex-al-pex-20-x-2/, but that may not be the cause at all. Have a nice day.

Could you please tell me the supply voltage of the EV 306 NO 3/4 solenoid shut-off valve? Thank you.

Hello, the voltage is 230. Have a nice day.

Hello, I found an advert on Facebook saying that you sell heating thermostats. I would like to ask whether you also offer a solution for zone control for approx. 7 zones; I have a gas boiler. Thank you

Hello, you will need 7x https://www.atria.sk/avansa-2003/ 7x https://www.atria.sk/elektrotermicka-hlavica-230-v/ https://www.atria.sk/rozvodnica-saswell-scu209led/ Have a nice day.

Hello, we bought a house with this boiler connected to underfloor heating; the manual is attached. ZWR 24-3 KE... For several seasons I have been looking for a suitable thermostat, preferably a wireless one. At last I have come across your great online shop. Could you please advise me what to do and how to wire it up? Otherwise we are entirely satisfied with Junkers. As a trial I have ordered this model from you: Avansa 2007 TX. I have no idea, though, whether it will be compatible. If not, could you please suggest another model and a wiring diagram? I would also welcome one with a WiFi connection and remote control, perhaps something from Jablotron. Thank you

Hello, yes, it will work. A suitable WiFi thermostat that we have available can be found here, for example: https://www.atria.sk/saswell-t19-7-rf-app/ Have a nice day.

Thank you for your answer. I am also sorting out electric underfloor heating in a summer extension, an estimated 15 m2 / 300 W (kitchenette + small bathroom + plant room for the photovoltaics); the building is nearing completion. Is there a thermostat available from the same manufacturer, e.g. Saswell, that is compatible with the app? I would like to control everything via WiFi or LAN. The house - underfloor heating, and the extension - electric heating mats. My network is built on Cisco - router, access points and switches. Please put my order on hold; I would rather take a better and comprehensive future-proof solution from you, as I will also need a new boiler for the underfloor heating - a house making use of the electricity it generates. Thanks in advance.

Hello, you need one thermostat for each mat. A suitable WiFi thermostat is this one from Saswell: https://www.atria.sk/saswell-t19-7-rf-app/ Have a nice day.

Good day, I would like to ask you to price heating material according to a bill of quantities. I would like two quotations: the first for the central heating and the second for the boiler room. Please price identical materials from the manufacturers as per the bill of quantities, and in addition include in the quotation 2 LOGOFloor corridor manifolds, 5 circuits, Ballorex Delta + DRV DN 25

Good evening, attached to the e-mail below I am sending you the requested quotation for the goods we have available. Kind regards

Hello, I would like an offer for Solaren EKO solar fluid - 30 l. Please also let me know the availability and delivery options.

Hello, we have this one available: https://www.atria.sk/termsol-nemrznuca-zmes-20-litrova/ The fluid is in stock. Have a nice day.

Hello, I would like some information about your product range. I am interested in the two-way zone valve DN 25 F1404 - with that clip system, can the actuator be removed without dismantling the valve? And if you have a technical data sheet, please send it to me. Thank you.

Hello, yes, exactly. I am sending you links with more information: https://hpwsk.sk/embed/mv120-manual.pdf https://hpwsk.sk/embed/first-euromix_mv_120.pdf https://hpwsk.sk/embed/emv110-manual.pdf https://hpwsk.sk/embed/ROTODIVERT.pdf Have a nice day.

Hello. We have electric heating and are going to replace the thermostats throughout the house. We have been thinking about a wireless thermostat for each room. I would like to ask specifically about the Saswell T19 7 RF (https://www.atria.sk/saswell-t19-7-rf/#popis): 1. Is it possible to have several of these thermostats in the house without them interfering with one another? (Do they have some kind of unique pairing code?) 2. Because of the way the heating was installed, during the off-peak cut-off period (4 times a day) no power reaches the thermostat, so it effectively switches off and comes back on after an hour. Will the receiver and transmitter be able to pair with each other automatically without my having to intervene? That is, the thermostat runs on batteries and sits on the table, but the receiver on the wall will be without power; when it comes back on after an hour, will the thermostat find it by itself? Thank you.

Hello, yes, you can have several of them. And yes, you do not need to pair anything again; the thermostat will find it by itself. Have a nice day.

Hello, I cannot find waste pipes for internal drainage on your website. Do you offer them? If so, in which section will I find them? Thank you

Hello, no, we do not offer these pipes. Have a nice day

Greetings, which Junkers boiler with an 80 l hot water cylinder would you recommend for a family house from the 1980s, uninsulated, built of blocks, with a volume of 207 m3? Thank you

Hello, a suitable choice could be this Junkers set, now sold under the BOSCH name, with the control included in the price. https://www.atria.sk/bosch-condens-gc-2300i-w-24-wst-120-5-o-cw-100/ Have a nice day.

Good day, I would need some advice on a suitable connection for a dual-fuel radiator. The water flow is on the right-hand side, where I want to fit an electric heating element and an underfloor heating thermostat. On the left-hand side (the return) there should only be a shut-off valve. Which product would you recommend? Thank you.

Hello, you will find heating elements with a thermostat here https://www.atria.sk/vykurovacia-technika/radiatory-rebrikove/vykurovacie-tyce-spiraly/spiraly-s-termostatom-biele/ and a plug here https://www.atria.sk/zatka-ivar-ac-600-n-1-2-550086/ Have a nice day.

Hello, I am writing with an enquiry following today's phone call about a DN 100 four-bolt gate valve.

Hello, we are checking availability with the supplier. We will keep you informed. Have a nice day.

Thank you, I will wait.

Hello, according to information from the supplier, several versions are available. We need you to specify: Type of medium? Pressure? Temperature? Intended use. Thank you.

Hello, it is for a public water main, cold water, pressure up to 16 bar.

Hello, I am sending two options to your e-mail address. The goods are made to order and payment is by pro forma invoice. Have a nice day.

Hello, I am unable to pay for my order online by card.

Hello, if it is not possible to pay for the order online by card, please choose bank transfer as the payment method. We will send you a pro forma invoice and dispatch the goods once it has been paid. Have a nice day.

Hello, we have already ordered pipes from you for one building. I would like a quotation for another building under construction, as per the attachment. Can you price at least roughly what we will need? If we install it ourselves, can you arrange an inspection report? If there is anything to discuss, it would probably be best if you called me.

Hello, I am sending you the requested quotation for underfloor heating for approx. 146 m2. I am sorry, but we do not arrange inspection reports. Have a nice day.

Can you offer me a complete package including solar, a gas boiler and hot water cylinders, water pipework, Geberit frames, everything we need according to the design? So far we are only building the partition walls; we have just the water supply into the house and the main drain runs.

Hello, you can find solar sets including a hot water cylinder here: https://www.atria.sk/vykurovacia-technika/solarne-sety-a-kolektory/s-plochymi-kolektormi/ You can find a gas boiler here: https://www.atria.sk/bosch-condens-gc-2300i-w-24-p/ For the water pipework: https://www.atria.sk/potrubie-pex-al-pex-16-x-2/ and this section: https://www.atria.sk/vykurovacia-technika/spojky-fitingy-na-rury/skrutkove-spoje/ We do not have Geberit products available. Have a nice day.

Hello. I would be interested in material for redoing the water pipework in my house. Could you price the list of material in the attached table? Thank you

Hello, I am sending to your e-mail address the requested quotation for the material we have available. Have a nice day.

Hello, do you also ship goods to the Czech Republic? I would like to order samples before placing a larger order.

Hello, yes, of course, we also ship goods to the Czech Republic. In case you are interested, here is a link to our Czech website as well: https://www.navio.cz/ Have a nice day.

Hello, I did not find the material I need on the Czech website you linked to. Perhaps it is stored there somewhere under a different name. Below I am sending a copy of the unsent order from your range. I could not complete the order because it was not possible to set the delivery - destination Czech Republic. No option other than the Slovak Republic was offered. I need to see samples and then I would order more material. Do you know the grade number (designation) of the stainless steel used for the corrugated pipes? After seeing and handling the samples I would order more material. I need to try the dimensions of the corrugated pipes in a forming jig. A later order would probably go by carrier and to a different destination.

Hello, I am sending you a link to navio.cz; to make things easier, the sets are listed there directly: https://www.navio.cz/vytapeci-technika/solarni-sety-a-kolektory/solarni-dvoutrouby/ If I may ask, you can add them straight to the basket in the quantities you need and in Czech crowns. The marking on the corrugated pipe is SS316L. Thank you and have a nice day.

HELLO, I WOULD LIKE TO ASK ABOUT A COMBINED WATER HEATER... WHAT PRICE DO YOU HAVE THE 150 L... OR THE 200 L AT, THANK YOU

Hello, you can find a suitable water heater here: https://www.atria.sk/vykurovacia-technika/zasobniky-a-bojlery/eliz/kombinovane-lezate-nadrze/ Have a nice day.

Hello, could you prepare a quotation for underfloor heating + a boiler, bearing in mind that we then want to add a fireplace with a back boiler. The bungalow is 114 m2; I would send you the design. We reckoned on approx. 10 circuits

Hello. Attached I am sending you a quotation for approx. 114 m2 of underfloor heating. The quotation includes a system insulation board 58 mm high. There are, of course, lower ones at a lower price as well: https://www.atria.sk/systemova-izolacna-doska-uhp53/. I have included a Junkers combi boiler in the quotation. Have a nice day.

We have wood-fired heating, but we can no longer manage the wood and want to switch to electricity, and I would need some help. It is 50 m from the pole and I would like to know how thick a cable I need for that distance. The house is not insulated, it has 100 square metres and 7 radiators. And how powerful an electric boiler - will 12 kW be enough? Advice would help a great deal, thank you very much in advance.

Hello, for your floor area this boiler, for example, will be sufficient: https://www.atria.sk/protherm-ray-12ke/. As for the cable from the pole to your house, I cannot help you with that. You need to contact the electricity distributor. Have a nice day.

Thank you

Hello, I would like to ask: I have a family house with solid fuel heating, forced circulation, three storeys. What pressure should there be in the heating system and in the expansion vessel? Thank you.

Hello, the pressure should be 2 bar. Have a nice day.

Hello, do you have a collection point in Bratislava or the surrounding area?

Hello, I am sorry, but we only have a collection point in Žilina. We can, however, send the goods directly to your address. Have a nice day.

Hello, I am thinking about buying this boiler and have a few questions. When buying this boiler, what else do I have to purchase? Apart from radiators and pipes. I mean a circulation pump, expansion vessel, flue, thermostat....

Hello, yes, you will need pipe: https://www.atria.sk/potrubie-pex-al-pex-20-x-2/ radiators: https://www.atria.sk/vykurovacia-technika/radiatory/ an expansion vessel: https://www.atria.sk/vykurovacia-technika/kurenie-profesionalne/expanzne-nadoby/expanzne-nadoby-na-kurenie/ the pump is already built into the boiler; you can put the flue together here, or if you prefer we can put it together for you based on your description: https://dymovod.sk/ you can find a suitable thermostat here, for example: https://www.atria.sk/avansa-2007/ and possibly a filter as well: https://www.atria.sk/caleffi-5453-dirtmag-3-4/ Have a nice day.

Hello, my father has a Protherm Panther 24(12) KTO/KOO boiler. He would like a wireless thermostat for it. Could you recommend one for this boiler? Thank you

Hello, you can find a suitable wireless thermostat here, for example: https://www.atria.sk/avansa-2007-tx/ Have a nice day.

Hello, we would need advice on which backup power supply (UPS) to buy for a 24 kW fireplace insert with a heat exchanger and an ATTACK pump, MIN 46 - MAX 93 W; the one we wanted is no longer in your range. Please advise, thank you.

Hello, you can find a suitable backup power supply here: https://www.atria.sk/avansa-700-w/ Have a nice day.

Good day, I am planning to build a family house as follows: 30 cm brick, 15 cm insulation, good-quality triple glazing with a triple seal, 4-18-4-18-4, so the heat transmission is low. There is only electricity and water on the plot. Which method of heating and domestic hot water heating would you recommend? The living area is approx. 130 m2. Thank you very much

Hello, as there is only electricity on the plot, an electric boiler with a hot water cylinder is the option to consider, for example: https://www.atria.sk/protherm-ray-14k-fe-120-bm-thermolink-p/ Have a nice day.

Hello.... I have gas-fired underfloor heating in my house with two manifolds, one with 6 circuits and the other with 4 circuits; the gas boiler is a Viessmann Vitodens 111-W. Which wireless measuring or control equipment would you recommend so that the individual circuits can be controlled separately and the individual rooms are not overheated unnecessarily? Thank you for your answer....

Hello. I would recommend a wiring centre for each manifold: https://www.atria.sk/hpw-rozvodnica-230v/ and an actuator for each circuit: https://www.atria.sk/elektrotermicka-hlavica-24-v/. The AVANSA 2003 TX room controller: https://www.atria.sk/avansa-2003-tx/ Have a nice day.

Hello, we would need to buy a circulation pump for an older Protherm KTO 12 Turbo boiler. Would you have such a pump in your range?? Thank you

Hello, try contacting your service technician, as these boilers have special pumps and we do not stock them. Have a nice day.

just over a year ago I bought 22 mm copper pipes and solder fittings for heating from you. Now I cannot find anything; perhaps I am searching badly. Can you tell me whether you sell copper?

Hello. There may have been a mix-up, but we do not sell copper pipe or solder fittings. Have a nice day.